Search
CLECO S10555
CLECO S10555 branded products
NEOTEK DC TOOL 92-443 FT/LBS 190 RPM
CL 70EAN600SA8T
CL 70EAN600SA8T
NUTSTR, 70 SERIES AH - 600NMDurability and unsurpassed RPM for high torque applications up to 4000 Nm
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Flexible high torque solutions
- 60% speed increase over current legacy series tools
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
Call for pricing
Socket, 3/4 In, SQ Dr, 3/4 HE X 4 OAL
CL 7524
CL 7524
3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Diameter Drive End (C): 1-3/8 in
- Diameter Nose End (B): 1-1/8 in
- Hex Opening: 3/4 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 15/32 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 4 in
$114.10
3/4in Nutrunner, 150-305 Ft-Lb, 80 Rpm
CL 75RNAL-2X-6
CL 75RNAL-2X-6
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
NutRunner, Angle, 1/2" Square Drive
CL 75RNAL-2V-4
CL 75RNAL-2V-4
NutRunner, Angle, 1/2" Square Drive
$8,945.30
NutRunner
CL 75RNAL-3V-4
CL 75RNAL-3V-4
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 13.2 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 13.2 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
Nutrunner
CL 75RNL-2X-6
CL 75RNL-2X-6
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 13.1 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series
Tool Configuration: Right Angle
Weight (lbs): 13.1 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$7,407.40
Nutrunner, Stall, Rev, Lever Start, 1/2 Sq Dr
CL 75RNL-3V-4
CL 75RNL-3V-4
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 11.4 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series
Tool Configuration: Right Angle
Weight (lbs): 11.4 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$7,407.40
Nutrunner 3/4in
CL 75RNAL-3X-6
CL 75RNAL-3X-6
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
Pulse Nutrunner
CL 7PTHH35Q
CL 7PTHH35Q
PULSNTSMarket leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port
Drive Type: Quick Change
Tool Configuration: Pistol
Weight (lbs): 1.74 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8in Square to 7/16" Quick Change
Drive Type: Quick Change
Tool Configuration: Pistol
Weight (lbs): 1.74 lb
7/16 Quick Change Chuck available separately as an accessory
$3,544.45
Shutoff Pulse, Pistol, 1/2 Sq Dr, 50-80 nm
CL 80PTHH354
CL 80PTHH354
PULSNTSMarket leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 3.09 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8in Square to 7/16" Quick Change
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 3.09 lb
7/16 Quick Change Chuck available separately as an accessory
$4,231.50
1/2 Shotoff Pulse, Pistol Grip, 4-120Nm
CL 80PTHHA354
CL 80PTHHA354
PULSNTSMarket leadin. repeatability unmatched accuracy. low maintenance, inertia shut-off. low noise level, efficient 3 chamber air motor. external speed control, oil less blades reversible torque signal port
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 3.31 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8 inch Square to 7/16 inch Quick Change
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 3.31 lb
7/16 Quick Change Chuck available separately as an accessory
$4,677.40
Bushing Inlet
CL 841553
CL 841553
Bushing InletLight duty for rotary tools Heavy duty for percussion tools
$10.50
BUSHING, INLET (3/8 NPT)
CL 841552
CL 841552
BUSHING, INLET (3/8 NPT)Light duty for rotary tools Heavy duty for percussion tools
$48.00
Screwdriver, Inline, Push To Start, Push Button Reverse, 400 RPM 1.2-13.2 Ft Lbs, 3/8 Sq Dr
CL 88RSA-5C-3
CL 88RSA-5C-3
SCREWDRIVER1.2 - 13.2 ftlbs / 1.7 - 18Nm
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- C-3 3/8" Square or CQ 1/4" Quick Release Output.
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
$2,861.95
Inline S/D- 400 Rpm
CL 88RSA-5CQ
CL 88RSA-5CQ
SCREWDRIVER1.2 - 13.2 ftlbs / 1.7 - 18Nm
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- C-3 3/8" Square or CQ 1/4" Quick Release Output.
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
$2,861.95
Nutdriver, Inline, 15-95 in Lbs, 550 RPM
CL 88RSA-7C-3
CL 88RSA-7C-3
SCREWDRIVER1.2 - 13.2 ftlbs / 1.7 - 18Nm
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- C-3 3/8" Square or CQ 1/4" Quick Release Output.
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
$2,861.95
Screwdriver, Inline, Push and Lever Start, Push Button Reverse, 400 RPM, 1.2-13.2 Ft Lbs, 3/8 Sq Dr
CL 88RSAL-5C-3
CL 88RSAL-5C-3
SCREWDRIVER1.2 - 13.2 ftlbs / 1.7 - 18Nm
Tool Configuration: Inline
Weight (lbs): 3.11 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006. All torque springs required to meet indicated torque
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 5C-3 3/8" Square or 5CQ 1/4" Quick Release Output
Tool Configuration: Inline
Weight (lbs): 3.11 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006. All torque springs required to meet indicated torque
$2,861.95
Inline S/D Clecomatic
CL 88RSA-7CQ
CL 88RSA-7CQ
SCREWDRIVER1.2 - 13.2 ftlbs / 1.7 - 18Nm
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- C-3 3/8" Square or CQ 1/4" Quick Release Output.
Tool Configuration: Inline
Weight (lbs): 2.62 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006 on models above 8 ft lbs torque cap. All torque springs required to meet indicated torque.
$2,861.95
Screwdriver
CL 88RSAL-5CQ
CL 88RSAL-5CQ
SCREWDRIVER1.2 - 13.2 ftlbs / 1.7 - 18Nm
Tool Configuration: Inline
Weight (lbs): 3.11 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006. All torque springs required to meet indicated torque
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 5C-3 3/8" Square or 5CQ 1/4" Quick Release Output
Tool Configuration: Inline
Weight (lbs): 3.11 lb
General: 90 psi (620kPa) required for maximum rated torque. Weight does not include side handle. Standard Equipment: Operating instructions & service manual Suspension bail Side handle 861006. All torque springs required to meet indicated torque
$2,861.95
Pistol Grip Reverse S/D Clecomatic / 550 rpm
CL 88RSAPT-7CQ
CL 88RSAPT-7CQ
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ft lbs torque
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- C-3 3/8" Square or CQ 1/4" Quick Release Output.
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ft lbs torque
$3,048.50
Screwdriver, 400 Rpm, Auto Shutoff
CL 88RSATP-5C-3
CL 88RSATP-5C-3
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 3/8" Square or 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$3,048.50
Screwdriver
CL 88RSATP-2C-3
CL 88RSATP-2C-3
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.37 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- C-3 3/8" Square or CQ 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.37 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$3,048.50
Nut Setter
CL 88RSATP-5CQ
CL 88RSATP-5CQ
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 3/8" Square or 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$3,048.50
Screwdriver W/Bit & Finder
CL 8RSA-10
CL 8RSA-10
SCREWDRIVER0.5 - 5.3 ftlbs / 0.8 - 7.3 Nm - REQUIRES A SEPARATE BIT FINDER
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque Standard Equipment: Operating instructions & service manual Suspension bail D Require Bit Finder Ordered Seperately
- Bit Finder Style For Automation, Screwfeeders, Pick and Place
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque Standard Equipment: Operating instructions & service manual Suspension bail D Require Bit Finder Ordered Seperately
$2,520.70
Screwdriver
CL 88RSATP-7CQ
CL 88RSATP-7CQ
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 3/8" Square or 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$3,048.50
DGD INTELLIGENT SPINDLE SIZE 4 STANDARD LENGTH 3/4 IN SQUARE DRIVE ADAPTOR
CL 916643
CL 916643
OUTPUT SHAFT, DRIVE 4ZA, GR.4, 3/4"
$458.00
Payment options
