Airpower | Diaphragm

Husky Pump,515P-Pp01Ap3Ppspsppt0

GG D52966

HUSKY PUMP, 515P-PP01AP3PPSPSPPT0

Graco D52966 Husky 515 PP 1/2 in NPT Standard Pump, PP Center Section, PP Seats, SP Balls & SP Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing
Delivery up to 15 gpm (56.7 lpm)
Easy-to-service air valve and ball checks
Reliable air valve for years of dependable performance

Model: Husky
Series: 515

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: Santoprene

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

Connection Type: Threaded

Diaphragm Compatible Material: Santoprene
Diaphragm Material: Santoprene

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Polypropylene

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Polypropylene

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature (degree C): 66
Maximum Operating Temperature (degree F): 150

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature (degree C): 4
Minimum Operating Temperature (degree F): 40

Overall Height (in): 10.63

Power Source: Air

$834.00

Triton Pump, Diaphragm, 1:1, Aluminum

GG 233500

TRITON PUMP,DIAPHRAGM,1:1 ALUMINUM

Graco 233500 Triton Air-Operated Diaphragm Pump, Bare, Aluminum, NPT

Effective alternative to traditional pressure pots and standard diaphragm pumps

Double diaphragm pump designed specifically for finishing applications
Low pulsation output provides smooth pump changeover
Low shear design for minimal degradation of shear sensitive materials

$1,410.00

Husky Pump,515P-Pp01Ap3Ppptptpt0

GG D52911

HUSKY PUMP, 515P-PP01AP3PPPTPTPT0

Graco D52911 Husky 515 PP 1/2 in NPT Standard Pump, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing
Delivery up to 15 gpm (56.7 lpm)
Easy-to-service air valve and ball checks
Reliable air valve for years of dependable performance

Model: Husky
Series: 515

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: PTFE

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Polypropylene

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Polypropylene

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature (degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 10.63

Power Source: Air

$1,150.00

Husky Pump,515Ac-Pp01Aac3Acptptpt0

GG D51211

HUSKY PUMP, 515AC-PP01AAC3ACPTPTPT0

Graco D51211 Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, AC Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing
Delivery up to 15 gpm (56.7 lpm)
Easy-to-service air valve and ball checks
Reliable air valve for years of dependable performance

Model: Husky
Series: 515

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: PTFE

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Acetal

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Acetal

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 82
Maximum Operating Temperature ( degree F): 180

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 10.63

Power Source: Air

$1,370.00

Husky Pump,1050A-Pa01Aa1Ssptptpt

GG 647028

HUSKY PUMP, 1050A-PA01AA1SSPTPTPT

Graco 647028 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9

$2,160.00

Husky Pump,716SS-Poly Air Motor Teflon Balls and Diaphragms

GG D54311

HUSKY PUMP, 716S-PP01AS1SSPTPTPT0

Graco D54311 Husky 716 SS Air Operated Double Diaphragm Metal Pump

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-porting
No mechanical seals which causes fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
3/4 in (19.05 mm) center- and end-porting
No seals to leak or fail
Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks

Model: Husky
Series: 716

Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: PTFE

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Stainless Steel

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Stainless Steel

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 6.9

Maximum Air Pressure (kPa): 690
Maximum Air Pressure (MPa): 0.69
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 16
Maximum Flow Rate (L/min): 60.6

Maximum Fluid Pressure (bar): 6.9
Maximum Fluid Pressure (kPa): 690
Maximum Fluid Pressure (MPa): 0.69
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 107
Maximum Operating Temperature ( degree F): 225

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Power Source: Air

$2,680.00

Pump, Triton Diaphragm SS 1:1

GG 233501

TRITON PUMP,DIAPHRAGM,1:1 SST

Graco 233501 Triton Air-Operated Diaphragm Pump, Bare, SST, NPT

Effective alternative to traditional pressure pots and standard diaphragm pumps

Double diaphragm pump designed specifically for finishing applications
Low pulsation output provides smooth pump changeover
Low shear design for minimal degradation of shear sensitive materials

$2,600.00

Husky Pump,515Ac-Pp01Aac3Ssptptpt0

GG D51311

HUSKY PUMP, 515AC-PP01AAC3SSPTPTPT0

Graco D51311 Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing
Delivery up to 15 gpm (56.7 lpm)
Easy-to-service air valve and ball checks
Reliable air valve for years of dependable performance

Model: Husky
Series: 515

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: PTFE

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Acetal

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Acetal

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 82
Maximum Operating Temperature ( degree F): 180

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 10.63

Power Source: Air

$1,750.00

Husky Pump,1050S-A01As1Ssptptpt

GG 651009

HUSKY PUMP, 1050S-A01AS1SSPTPTPT

Graco 651009 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 13.7

$3,730.00

Husky Pump,307Ac-Pp01Aac3Acptptpt

GG D31211

HUSKY PUMP, 307AC-PP01AAC3ACPTPTPT

Graco D31211 Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, AC Seats, PTFE Balls & PTFE Diaphragm

The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.

Application: Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense. Some models UL-approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil and lubricating oil.

Quick and easy assembly and disassembly design
Easy to service air valve and ball checks
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Every pump is tested prior to shipping
3/8 in (9.52 mm) end porting
Delivery up to 7 gpm (26.5 lpm)
Easy-to-service air valve and ball checks

Model: Husky
Series: 307

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: PTFE

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Acetal

Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Acetal

Maximum Air Consumption (SCFM): 5.5
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 330

Maximum Flow Rate (GPM): 6.5
Maximum Flow Rate (L/min): 24.6

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 82
Maximum Operating Temperature ( degree F): 180

Maximum Solid Size (cm): 0.1588
Maximum Solid Size (in): 0.0625
Maximum Solid Size (mm): 1.5875

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 8.13

Power Source: Air

$935.00

Husky Pump,515Ac-Pp01Aac3Ssssptpt0

GG D51331

HUSKY PUMP, 515AC-PP01AAC3SSSSPTPT0

Graco D51331 Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing
Delivery up to 15 gpm (56.7 lpm)
Easy-to-service air valve and ball checks
Reliable air valve for years of dependable performance

Model: Husky
Series: 515

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: 316 Stainless Steel

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Acetal

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Acetal

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 104
Maximum Operating Temperature ( degree F): 220

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature (degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 10.63

Power Source: Air

$1,795.00

Husky Pump,205P-Pp01Ap5--Ppptpt-Fk

GG D12091

HUSKY PUMP, 205P-PP01AP5--PPPTPT-FK

Graco D12091 Husky 205 PP AODD Plastic Pump, PP/PT/PT-FKM

Our Husky air-operated double diaphragm pumps are loaded with features to help you get the job done right, every time, and are built to save you money.

Application: The Husky 205 air-operated diaphragm pump features spring check valves for superior priming in any mounting configuration.

True-formed PTFE and Santoprene diaphragms for enhanced performance
Spring loaded checks allow the diaphragm pump to work in any orientation
Inlet and Outlet are interchangeable
1/4-in (6.35 mm) end-porting double diaphragm pump

Model: Husky
Series: 205

Air Exhaust Port Size (in): 1/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT, BSP
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT, BSP

Application: Industrial

Ball Material: Polypropylene

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT, BSPT

Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT, BSPT
Fluid Section Material: Polypropylene

Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Polypropylene

Maximum Air Consumption (SCFM): 9
Maximum Air Pressure (bar): 6.9

Maximum Air Pressure (kPa): 690
Maximum Air Pressure (MPa): 0.69
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 320

Maximum Flow Rate (GPM): 5
Maximum Flow Rate (L/min): 18.9

Maximum Fluid Pressure (bar): 6.9
Maximum Fluid Pressure (kPa): 690
Maximum Fluid Pressure (MPa): 0.69
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Solid Size (cm): 0.15
Maximum Solid Size (in): 0.06
Maximum Solid Size (mm): 1.5

Overall Height (in): 6

Power Source: Air

$653.00

Husky Pump,2150A-Pa01Aa1Tpactp

GG DF3525

HUSKY PUMP, 2150A-PA01AA1TPACTP

Graco DF3525 Husky 2150 AL Air Operated Double Diaphragm Metal Pump, TPE/AC

The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

Overall improved efficiency (up to 40% more efficient)
Highest fluid flow rate in its class
Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
2 in. (51 mm) ANSI end-porting
Fluid flow up to 150 gpm (568 lpm)
Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
Lube-free operation
Epoxy-coated air section for tough environmental conditions
Available in aluminum, 316 stainless steel, ductile iron and polypropylene

Model: Husky
Series: 2150

Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: Acetal

Center Section Material: Aluminum

Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Water - Wastewater Transfer

Connection Type: Threaded

Diaphragm Compatible Material: TPE
Diaphragm Material: TPE (Hytrel)

Fluid Inlet Size (cm): 5.08
Fluid Inlet Size (in): 2
Fluid Inlet Size (mm): 50.8
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 5.08
Fluid Outlet Size (in): 2
Fluid Outlet Size (mm): 50.8
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum

Manifold Configuration: End Port
Material: Aluminum

Maximum Air Consumption (SCFM): 175
Maximum Air Pressure (bar): 8.27

Maximum Air Pressure (kPa): 827
Maximum Air Pressure (MPa): 0.827
Maximum Air Pressure (psi): 120

Maximum Cycle Rate (CPM): 145

Maximum Flow Rate (GPM): 150
Maximum Flow Rate (L/min): 568

Maximum Fluid Pressure (bar): 8.27
Maximum Fluid Pressure (kPa): 827
Maximum Fluid Pressure (MPa): 0.827
Maximum Fluid Pressure (psi): 120

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Solid Size (cm): 0.635
Maximum Solid Size (in): 0.25
Maximum Solid Size (mm): 6.35

Power Source: Air

$2,460.00

Husky Pump,307Ac-Pp01Aac3Ssssptpt

GG D31331

HUSKY PUMP, 307AC-PP01AAC3SSSSPTPT

Graco D31331 Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.

Application: Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense. Some models UL-approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil and lubricating oil.

Quick and easy assembly and disassembly design
Easy to service air valve and ball checks
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Every pump is tested prior to shipping
3/8 in (9.52 mm) end porting
Delivery up to 7 gpm (26.5 lpm)
Easy-to-service air valve and ball checks

Model: Husky
Series: 307

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: 316 Stainless Steel

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Acetal

Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Acetal

Maximum Air Consumption (SCFM): 5.5
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 330

Maximum Flow Rate (GPM): 6.5
Maximum Flow Rate (L/min): 24.6

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 82
Maximum Operating Temperature ( degree F): 180

Maximum Solid Size (cm): 0.1588
Maximum Solid Size (in): 0.0625
Maximum Solid Size (mm): 1.5875

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 8.13

Power Source: Air

$1,025.00

Husky Pump,515Ac-Pp01Aac3Ssssptpt-Fk

GG 26C092

Husky Pump,515Ac-Pp01Aac3Ssssptpt-Fk

$0.00

Husky Pump,1050A-Pa01Aa1Ssssptpt

GG 647018

HUSKY PUMP, 1050A-PA01AA1SSSSPTPT

Graco 647018 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9

$2,160.00

Husky Pump,205P-Pp01Ap5--Ppsppt-Fk

GG D12096

HUSKY PUMP, 205P-PP01AP5--PPSPPT-FK

Graco D12096 Husky 205 PP Pump, PP Center Section, PP Balls & SP Diaphragm

Our Husky air-operated double diaphragm pumps are loaded with features to help you get the job done right, every time, and are built to save you money.

Application: The Husky 205 air-operated diaphragm pump features spring check valves for superior priming in any mounting configuration.

True-formed PTFE and Santoprene diaphragms for enhanced performance
Spring loaded checks allow the diaphragm pump to work in any orientation
Inlet and Outlet are interchangeable
1/4-in (6.35 mm) end-porting double diaphragm pump

Model: Husky
Series: 205

Air Exhaust Port Size (in): 1/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT, BSP
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT, BSP

Application: Industrial

Ball Material: Polypropylene

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: Santoprene
Diaphragm Material: Santoprene

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT, BSPT

Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT, BSPT
Fluid Section Material: Polypropylene

Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Polypropylene

Maximum Air Consumption (SCFM): 9
Maximum Air Pressure (bar): 6.9

Maximum Air Pressure (kPa): 690
Maximum Air Pressure (MPa): 0.69
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 320

Maximum Flow Rate (GPM): 5
Maximum Flow Rate (L/min): 18.9

Maximum Fluid Pressure (bar): 6.9
Maximum Fluid Pressure (kPa): 690
Maximum Fluid Pressure (MPa): 0.69
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Solid Size (cm): 0.15
Maximum Solid Size (in): 0.06
Maximum Solid Size (mm): 1.5

Overall Height (in): 6

Power Source: Air

$475.00

Husky Pump,307Ac-Pp01Aac3Actptppt

GG D31255

HUSKY PUMP, 307AC-PP01AAC3ACTPTPPT

Graco D31255 Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, AC Seats, TPE Balls & TPE Diaphragm

The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.

Application: Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense. Some models UL-approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil and lubricating oil.

Quick and easy assembly and disassembly design
Easy to service air valve and ball checks
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Every pump is tested prior to shipping
3/8 in (9.52 mm) end porting
Delivery up to 7 gpm (26.5 lpm)
Easy-to-service air valve and ball checks

Model: Husky
Series: 307

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: TPE (Hytrel)

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: TPE
Diaphragm Material: TPE (Hytrel)

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Acetal

Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Acetal

Maximum Air Consumption (SCFM): 5.5
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 330

Maximum Flow Rate (GPM): 6.5
Maximum Flow Rate (L/min): 24.6

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Solid Size (cm): 0.1588
Maximum Solid Size (in): 0.0625
Maximum Solid Size (mm): 1.5875

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 8.13

Power Source: Air

$738.00

Husky Pump,716A-Pp01Aa1Acptptpt0

GG D53211

HUSKY PUMP, 716A-PP01AA1ACPTPTPT0

Graco D53211 Husky 716 AL Air Operated Double Diaphragm Metal Pump with NPT Standard Air Valve, AC Seat, PTFE Ball, & PTFE Diaphragm

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-porting
No mechanical seals which causes fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
3/4 in (19.05 mm) center- and end-porting
No seals to leak or fail
Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks

Model: Husky
Series: 716

Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: PTFE

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Aluminum

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 6.9

Maximum Air Pressure (kPa): 690
Maximum Air Pressure (MPa): 0.69
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 16
Maximum Flow Rate (L/min): 60.6

Maximum Fluid Pressure (bar): 6.9
Maximum Fluid Pressure (kPa): 690
Maximum Fluid Pressure (MPa): 0.69
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 107
Maximum Operating Temperature ( degree F): 225

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Power Source: Air

$1,305.00

Husky Pump,716A-Pp01Aa1Ssssptpt0

GG D53331

HUSKY PUMP, 716A-PP01AA1SSSSPTPT0

Graco D53331 Husky 716 AL Air Operated Double Diaphragm Metal Pump with NPT Standard Air Valve, SS Seat, SS Ball, & PTFE Diaphragm

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-porting
No mechanical seals which causes fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
3/4 in (19.05 mm) center- and end-porting
No seals to leak or fail
Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks

Model: Husky
Series: 716

Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: 316 Stainless Steel

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Aluminum

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 6.9

Maximum Air Pressure (kPa): 690
Maximum Air Pressure (MPa): 0.69
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 16
Maximum Flow Rate (L/min): 60.6

Maximum Fluid Pressure (bar): 6.9
Maximum Fluid Pressure (kPa): 690
Maximum Fluid Pressure (MPa): 0.69
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 107
Maximum Operating Temperature ( degree F): 225

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Power Source: Air

$1,425.00

Husky Pump,515F-Pp01Af3Pvptptpt0

GG D55A11

HUSKY PUMP, 515F-PP01AF3PVPTPTPT0

Graco D55A11 Husky 515 PVDF 1/2 in NPT Standard Pump, PP Center Section, PVDF Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing
Delivery up to 15 gpm (56.7 lpm)
Easy-to-service air valve and ball checks
Reliable air valve for years of dependable performance

Model: Husky
Series: 515

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: PTFE

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

Connection Type: Threaded

Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: PVDF (Kynar)

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: PVDF

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 107
Maximum Operating Temperature ( degree F): 225

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 10.63

Power Source: Air

$0.00

Husky Pump,1050A-A01AA1TPACTP

GG 647666

HUSKY PUMP, 1050A-PA01AA1TPACTP

Graco 647666 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, TPE Seats, AC Balls & TPE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Acetal
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: TPE
        Diaphragm Material: TPE (Hytrel)
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 66
        Maximum Operating Temperature ( degree F): 150
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9
        Power Source: Air

$1,605.00

1/2" Acetal Diaphragm Pump (Short Stroke)

BB 41-818831

1/2" Acetal Diaphragm Pump (Short Stroke)

$1,939.00

Husky Pump,1050P-Pp01Ap2Ppptptpt

GG 649034

HUSKY PUMP, 1050P-PP01AP2PPPTPTPT

Graco 649034 Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Polypropylene
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: End Flange ANSI/DIN
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Section Material: Polypropylene
        Manifold Configuration: End Port
        Manifold O-Ring Material: PTFE
        Material: Polypropylene
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 66
        Maximum Operating Temperature ( degree F): 150
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 17.8
        Power Source: Air

$2,120.00

Husky Pump,1050S-Pa01As1Ssssptpt

GG 651000

HUSKY PUMP, 1050S-PA01AS1SSSSPTPT

Graco 651000 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in):

$3,840.00

Diaphragm

GG D52966

HUSKY PUMP, 515P-PP01AP3PPSPSPPT0

Graco D52966 Husky 515 PP 1/2 in NPT Standard Pump, PP Center Section, PP Seats, SP Balls & SP Diaphragm

GG 233500

TRITON PUMP,DIAPHRAGM,1:1 ALUMINUM

Graco 233500 Triton Air-Operated Diaphragm Pump, Bare, Aluminum, NPT

GG D52911

HUSKY PUMP, 515P-PP01AP3PPPTPTPT0

Graco D52911 Husky 515 PP 1/2 in NPT Standard Pump, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

GG D51211

HUSKY PUMP, 515AC-PP01AAC3ACPTPTPT0

Graco D51211 Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, AC Seats, PTFE Balls & PTFE Diaphragm

GG 647028

HUSKY PUMP, 1050A-PA01AA1SSPTPTPT

Graco 647028 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

GG D54311

HUSKY PUMP, 716S-PP01AS1SSPTPTPT0

Graco D54311 Husky 716 SS Air Operated Double Diaphragm Metal Pump

GG 233501

TRITON PUMP,DIAPHRAGM,1:1 SST

Graco 233501 Triton Air-Operated Diaphragm Pump, Bare, SST, NPT

GG D51311

HUSKY PUMP, 515AC-PP01AAC3SSPTPTPT0

Graco D51311 Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

GG 651009

HUSKY PUMP, 1050S-A01AS1SSPTPTPT

Graco 651009 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

GG D31211

HUSKY PUMP, 307AC-PP01AAC3ACPTPTPT

Graco D31211 Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, AC Seats, PTFE Balls & PTFE Diaphragm

GG D51331

HUSKY PUMP, 515AC-PP01AAC3SSSSPTPT0

Graco D51331 Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

GG D12091

HUSKY PUMP, 205P-PP01AP5--PPPTPT-FK

Graco D12091 Husky 205 PP AODD Plastic Pump, PP/PT/PT-FKM

GG DF3525

HUSKY PUMP, 2150A-PA01AA1TPACTP

Graco DF3525 Husky 2150 AL Air Operated Double Diaphragm Metal Pump, TPE/AC

GG D31331

HUSKY PUMP, 307AC-PP01AAC3SSSSPTPT

Graco D31331 Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

GG 26C092

GG 647018

HUSKY PUMP, 1050A-PA01AA1SSSSPTPT

Graco 647018 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

GG D12096

HUSKY PUMP, 205P-PP01AP5--PPSPPT-FK

Graco D12096 Husky 205 PP Pump, PP Center Section, PP Balls & SP Diaphragm

GG D31255

HUSKY PUMP, 307AC-PP01AAC3ACTPTPPT

Graco D31255 Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, AC Seats, TPE Balls & TPE Diaphragm

GG D53211

HUSKY PUMP, 716A-PP01AA1ACPTPTPT0

Graco D53211 Husky 716 AL Air Operated Double Diaphragm Metal Pump with NPT Standard Air Valve, AC Seat, PTFE Ball, & PTFE Diaphragm

GG D53331

HUSKY PUMP, 716A-PP01AA1SSSSPTPT0

Graco D53331 Husky 716 AL Air Operated Double Diaphragm Metal Pump with NPT Standard Air Valve, SS Seat, SS Ball, & PTFE Diaphragm

GG D55A11

HUSKY PUMP, 515F-PP01AF3PVPTPTPT0

Graco D55A11 Husky 515 PVDF 1/2 in NPT Standard Pump, PP Center Section, PVDF Seats, PTFE Balls & PTFE Diaphragm

GG 647666

HUSKY PUMP, 1050A-PA01AA1TPACTP

Graco 647666 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, TPE Seats, AC Balls & TPE Diaphragm

BB 41-818831

GG 649034

HUSKY PUMP, 1050P-PP01AP2PPPTPTPT

Graco 649034 Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

GG 651000

HUSKY PUMP, 1050S-PA01AS1SSSSPTPT

Graco 651000 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

Payment options