DYNABRADE INC. S12699
DYNABRADE INC. S12699 branded products
Housing Assy for Model # 59202 Rev. H
DY 58976
Housing Assy for Model # 59202 Rev. H
4hp Trim Router Replacement Air Motor 30,000 RPM, 1/4in Collet, Rear Exhaust, Governor-Controlled
DY 51814
4hp Trim Router Replacement Air Motor 30,000 RPM, 1/4in Collet, Rear Exhaust, Governor-Controlled
Housing Assembly for Model 54777 13,500 RPM
DY 25391
Housing Assembly for Model 54777 13,500 RPM
Disc Sander 1.3 Hp, Right Angle, 6,000 RPM, Side Exhaust, 5/8in-11 Male
DY 52655
Disc Sander 1.3 Hp, Right Angle, 6,000 RPM, Side Exhaust, 5/8in-11 Male
Lightweight Dyninger Finishing Tool, .4 hp, Straight-Line, 0-3,200 RPM, Rear Exhaust, 1/2" (13 mm) Dia. Arbor
DY 52052
Lightweight Dyninger Finishing Tool, .4 hp, Straight-Line, 0-3,200 RPM, Rear Exhaust, 1/2" (13 mm) Dia. Arbor
Mini-Raptor 2 M-Class Vacuum, 120V/60Hz, NEMA 5-15, 10 gal
DY 64810
Mini-Raptor 2 M-Class Vacuum, 120V/60Hz, NEMA 5-15, 10 gal
3-1/2in Dia. x 80 Grit A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc
DY 92580
3-1/2in Dia. x 80 Grit A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc
3-1/2in Dia. x 120 Grit A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc
DY 92581
3-1/2in Dia. x 120 Grit A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc
General Purpose Cleaning Kit Includes: Wand, Floor Tools, Brush, Crevice Tool, Vac Hose
DY 96746
General Purpose Cleaning Kit Includes: Wand, Floor Tools, Brush, Crevice Tool, Vac Hose
Tune-Up Kit, Compact Grinder Series Tools
DY 96817
Tune-Up Kit, Compact Grinder Series Tools
5inch Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap, 5/16-24 Male Thread
DY NP5H
5inch Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap, 5/16-24 Male Thread
.4 hp Trim Router (Complete) 30,000 RPM, Rear Exhaust, 1/4In. Collet, Governor-Controlled
DY 51854
.4 hp Trim Router (Complete) 30,000 RPM, Rear Exhaust, 1/4In. Collet, Governor-Controlled
Dynabug II Orbital Sander, Non-Vacuum, 3inx 4in Hook Pad .25 hp, 12,000 RPM, 3/32in (2 mm) Dia. Orbit, Rear Exhaust
DY 58520
Dynabug II Orbital Sander, Non-Vacuum, 3inx 4in Hook Pad .25 hp, 12,000 RPM, 3/32in (2 mm) Dia. Orbit, Rear Exhaust
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 80 Grit A/O DynaCut Belt
DY 90354
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 80 Grit A/O DynaCut Belt
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 40 Grit A/O DynaCut Belt
DY 90347
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 40 Grit A/O DynaCut Belt
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 40 Grit Z/A DynaCut Belt
DY 90267
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 40 Grit Z/A DynaCut Belt
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 60 Grit Z/A DynaCut Belt
DY 90272
3-1/2" (89 mm) W x 15-1/2" (394 mm) L 60 Grit Z/A DynaCut Belt
3/8in Drill .7 hp, 3400 rpm, Pistol-Grip, Geared, Rear Exhaust, Keyed Jacobs Chuck
DY 53060
3/8in Drill .7 hp, 3400 rpm, Pistol-Grip, Geared, Rear Exhaust, Keyed Jacobs Chuck
36 In. x 72 In. Downdraft Sanding Table 230V
DY 66715
36 In. x 72 In. Downdraft Sanding Table 230V
Raptor Vac, Elec. 120V w/Cleaning Kit, Div.1 Explosion Proof
DY 61452
Raptor Vac, Elec. 120V w/Cleaning Kit, Div.1 Explosion Proof
Raptor Vac, Pneumatic w/Cleaning Kit, Division 1 Explosion Proof 45 CFM
DY 61453
Raptor Vac, Pneumatic w/Cleaning Kit, Division 1 Explosion Proof 45 CFM
3/4" (19 mm) W x 18" (457 mm) L 40 Grit Ceramic DynaCut Belt
DY 82551
3/4" (19 mm) W x 18" (457 mm) L 40 Grit Ceramic DynaCut Belt
5in. Two-Hand Gear Driven Sander, Non-Vac
DY 58441
5in. Two-Hand Gear Driven Sander, Non-Vac
5in (125 mm) Dia. Vacuum Nitro-E Series Random Orbital Sander, Vacuum Short Hook Pad 150 Watt, 10,000 RPM, 3/16in (5 mm) Dia. Orbit, 110V
DY NSE5V
5in (125 mm) Dia. Vacuum Nitro-E Series Random Orbital Sander, Vacuum Short Hook Pad 150 Watt, 10,000 RPM, 3/16in (5 mm) Dia. Orbit, 110V
5in (127 mm ) Dia. 7 Degree Offset Vacuum Cut-Off Wheel Tool 1 Hp, 12,000 rpm, Rear Exhaust, 3/8In-24 Spindle Thread
DY 52438
5in (127 mm ) Dia. 7 Degree Offset Vacuum Cut-Off Wheel Tool 1 Hp, 12,000 rpm, Rear Exhaust, 3/8In-24 Spindle Thread
4-1/2in Dia. Compact Rebel Rt. Angle Type 41 Cut-off Wheel Tool 2.3 hp, 13,000 RPM
DY 58940
4-1/2in Dia. Compact Rebel Rt. Angle Type 41 Cut-off Wheel Tool 2.3 hp, 13,000 RPM
4-1/2"-5" (114 mm-127 mm) Dia. Pistol Grip Disc Sander
DY 50320
4-1/2"-5" (114 mm-127 mm) Dia. Pistol Grip Disc Sander
3in Disc Pad
DY 50126
3in (76 mm) Diameter Disc Pad, Hook 'N LoopRigid Backing, 3/8in -24 Female Thread
Compatible with angle-head and palm-style Mini-Dynorbital sanders. Angle-Head Buffers.
3in Disc Pad
DY 50120
3in (76 mm) Diameter Disc Pad, Hook 'N LoopFoam Backing, 1/4in -20 Female Thread
3in Hook Face Back Up Pad
DY 50125
3in (76 mm) Diameter Disc Pad, Hook 'N LoopRigid Backing, 1/4in -20 Female Thread
3in Foam Pad
DY 90038
3in (76 mm) Diameter Polishing Pad, Foam, Flat FaceReattachable Hook-Face Backing, Polishing/White
3in Natural Sheepskin Buffing Pad
DY 90080
3in (76 mm) Diameter Polishing Pad, Natural Sheepskin WoolReattachable Hook-Face Backing
100% natural wool pad with hook and loop attachment for quick and easy changes
For finishing and polishing the 100% natural wood pad has a softer feel than synthetic wool.
1/4in x 18in 220 Grit
DY 90225
1/4in (6 mm) W x 18in (457 mm) L 220 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
3-1/2 (89 MM) W X 15-1/2 (394 MM) L 80
DY 90273
3-1/2in (89 mm) W x 15-1/2in (394 mm) L 80 Grit A/Z DynaCut BeltA good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.
Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components
3-1/2 (89 MM) W X 15-1/2 (394 MM) L 12
DY 90275
3-1/2in (89 mm) W x 15-1/2in (394 mm) L 120 Grit A/Z DynaCut BeltA good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.
Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components
Fine Blue
DY 90281
3-1/2in (89 mm) W x 15-1/2in (394 mm) L Very Fine NWN DynaBrite Belt2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive
produces long life and consistent finishes on ferrous and non ferrous metals
Med. Maroon
DY 90282
3-1/2in (89 mm) W x 15-1/2in (394 mm) L Medium NWN DynaBrite Belt2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive
produces long life and consistent finishes on ferrous and non ferrous metals
3 1/2 x 15 1/2 Belt, Nylon
DY 90283
3-1/2in (89 mm) W x 15-1/2in (394 mm) L Coarse NWN DynaBrite Belt2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive
produces long life and consistent finishes on ferrous and non ferrous metals
1/2in x 12in, Very Fine NWN Dynabrite Premium Belt
DY 90312
1/2in (13 mm) W x 12in (305 mm) L Very Fine NWN DynaBrite Premium Belthigh perfomance aluminum oxide produces an aggressive cutting action
smear resistant resin reduces rework and cycle times
1/2in x 12in, Medium NWN Dynabrite Premium Belt
DY 90313
1/2in (13 mm) W x 12in (305 mm) L Medium NWN DynaBrite Premium Belthigh perfomance aluminum oxide produces an aggressive cutting action
smear resistant resin reduces rework and cycle times
1/2in x 12in, Coarse NWN Dynabrite Premium Belt
DY 90314
1/2in (13 mm) W x 12in (305 mm) L Coarse NWN DynaBrite Premium Belthigh perfomance aluminum oxide produces an aggressive cutting action
smear resistant resin reduces rework and cycle times
3 1/2 x 15 1/2 (320 Grit)
DY 90339
3-1/2in (89 mm) W x 15-1/2in (394 mm) L 320 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
2 (51 MM) W X 34 (864 MM) L 80 GRIT Z/
DY 90364
2in (51 mm) W x 34in (864 mm) L 80 Grit Z/A DynaCut BeltA good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.
The self-sharpening characteristic of the microcrystalline structure is combined with heavy strengh polyester cloth making these belts superior. We recommend these belts for optimum performance on our tools.
80 Grit A/O DynaCut Belt
DY 90368
3/4in (19 mm) W x 34in (864 mm) L 80 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
120 Grit A/O DynaCut Belt
DY 90370
3/4in (19 mm) W x 34in (864 mm) L 120 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
1/2in x 24in Very Fine
DY 90400
1/2in (13 mm) W x 24in (610 mm) L Very Fine NWN DynaBrite Premium Belthigh perfomance aluminum oxide produces an aggressive cutting action
smear resistant resin reduces rework and cycle times
Sanding Belt, 80 Grit, 1/8in x 24in, Must Purchase 50 Per Pack
DY 90407
1/8in (3 mm) W x 24in (610 mm) L 80 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
Sanding Belt, 120 Grit, 1/8in x 24in, Must Purchase 50 Per Pack
DY 90409
1/8in (3 mm) W x 24in (610 mm) L 120 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
1/4 (6 mm) W x 34 (864 mm) L 60 Grit A/O DynaCut Belt
DY 90475
1/4in (6 mm) W x 34in (864 mm) L 60 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
1/4 (6 mm) W x 34 (864 mm) L 80 Grit A/O DynaCut Belt
DY 90477
1/4in (6 mm) W x 34in (864 mm) L 80 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
1/4 (6 mm) W x 34 (864 mm) L 120 Grit A/O DynaCut Belt
DY 90479
1/4in (6 mm) W x 34in (864 mm) L 120 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
180 GRIT A/O DYNACUT BELT 1 1/2X30
DY 90593
1-1/2in (38 mm) W x 30in (762 mm) L 180 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
Sanding Belt, 60 Grit, 3/4 x 20-1/2 In.
DY 90641
3/4in (19 mm) W x 20-1/2in (521 mm) L 60 Grit A/Z DynaCut BeltA good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.
Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components
A/O DynaRoll 5pk, 3/4in x 7in, 50 Grit
DY 90680
3/4in (19 mm) W x 7in (178 mm) L 50 Grit A/O Large DynaRoll5 Pack
Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all specialty applications
A/O DynaRoll 5pk, 3/4in x 7in, 60 Grit
DY 90681
3/4in (19 mm) W x 7in (178 mm) L 60 Grit A/O Large DynaRoll5 Pack
Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all specialty applications
A/O DynaRoll 5pk, 3/4in x 7in, 80 Grit
DY 90682
3/4in (19 mm) W x 7in (178 mm) L 80 Grit A/O Large DynaRoll5 Pack
Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all specialty applications
A/O DynaRoll 5pk, 3/4in x 7in, 120 Grit
DY 90683
3/4in (19 mm) W x 7in (178 mm) L 120 Grit A/O Large DynaRoll5 Pack
Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all specialty applications
3in Dia x80 Grit Z/A Non-Vac. DynaCut Lock, Flap Disc, 10/Min
DY 90926
3in (76 mm) Diameter x 80 Grit Z/A Non-Vacuum DynaCut Locking-Type Flap DiscDynaCut Zirconia Alumina flap discs are manufactured with a ZA grain that is sharp, hard and tough. It works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.
For stock removal, deburring, blending, edge-chamfering and rust removal. Can also be used for general cleaning and finishing.
Straight File
DY 90950
90 mm L Round Swiss in 00in Very Coarse Reciprocating File3 mm x 15 mm Long Tang
Precision finishing on delicate parts. great for use on delicate substrates.
Deburring, detail work.
File Curved Cut
DY 90951
90 mm L Curved Round Swiss in 0in Coarse Reciprocating File3 mm x 15 mm Long Tang
Precision finishing on delicate parts. great for use on delicate substrates.
Deburring, detail work.
1 (25 MM) DIA. X 1 (25 MM) W 120 GRIT
DY 91072
1in (25 mm) Diameter x 1in (25 mm) W 120 Grit Z/A DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
1-1/2 (38 MM) DIA. X 1-1/2 (38 MM) W 1
DY 91082
1-1/2in (38 mm) Diameter x 1-1/2in (38 mm) W 120 Grit A/Z DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
1/4in x24in, 60 Grit A/O Dynacut Belt
DY 91434
1/4in (6 mm) W x 24in (610 mm) L 60 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
1/4in x 24in, 80 Grit A/O DynaCut Belt
DY 91435
1/4in (6 mm) W x 24in (610 mm) L 80 Grit A/O DynaCut BeltPremium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications
Durable X-weight backing is tough yet flexible for good performance in all file belt applications
5in NV 320 Grit PSA Film Disc
DY 91533
5in NV -320 Grit PSA DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
5in Vac, 60 Grit Hook and Loop Dynacut
DY 91535
5in Vac -60 Grit H&L DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
5 Inch Vac-220 Grit, Hook And Loop
DY 91541
5in Vac -220 Grit H&L DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
80 Grit Dynacut Extreme Sandpaper
DY 91563
6in Vac -80 Grit H&L DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
6 Inch Vac-120 Grit, Hook and Loop
DY 91565
6in Vac -120 Grit H&L DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
180 Grit Dynacut Extreme Sandpaper
DY 91567
6in Vac -180 Grit H&L DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
400 Grit Dynacut Extreme Sandpaper
DY 91570
6in Vac -400 Grit H&L DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
6 Inch Non-Vacuum 1200 Grit Sanding Pads
DY 91587
6in NV -1200 Grit PSA DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
5in NV, 600 Grit, PSA Extreme Disc, 50 Pack
DY 91600
5in NV -600 Grit PSA DynacutExtreme Orange Premium Film Disc 50 Pack
Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life
Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs
1 (25 MM) DIA. X 1 (25 MM) W 36 GRIT
DY 92012
1in (25 mm) Diameter x 1in (25 mm) W 36 Grit Z/A DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
1 (25 MM) DIA. X 2 (51 MM) W 36 GRIT Z
DY 92019
1in (25 mm) Diameter x 2in (51 mm) W 36 Grit Z/A DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
1 (25 MM) DIA. X 2 (51 MM) W 60 GRIT Z
DY 92020
1in (25 mm) Diameter x 2in (51 mm) W 60 Grit Z/A DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
1-1/2 (38 MM) DIA. X 1-1/2 (38 MM) W 3
DY 92030
1-1/2in (38 mm) Diameter x 1-1/2in (38 mm) W 36 Grit Z/A DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
1-1/2 (38 MM) DIA. X 1-1/2 (38 MM) W 6
DY 92034
1-1/2in (38 mm) Diameter x 1-1/2in (38 mm) W 60 Grit Z/A DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
2 (51 MM) DIA. X 2 (51 MM) W 36 GRIT Z
DY 92051
2in (51 mm) Diameter x 2in (51 mm) W 36 Grit Z/A DynaCut BandA good high performance mineral that is sharp, hard and tough.
The alumina zirconia mineral is versatile for use on almost any material
60 Grit A/Z Dynacut Belt
DY 92201
1-1/2in (38 mm) W x 30in (762 mm) L 60 Grit A/Z DynaCut BeltA good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.
Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components